Product ID:TECH HOLD KIT CYANOACRYLATE ADHESIVE, 901-K
MSDS Date:08/07/1989
FSC:8040
NIIN:00N018521
MSDS Number: BLFSN

Emergency Phone: 806-372-8523

Preparer: J WITCHER

Cage: DO989

Telephone: 806-372-8523

Cage: 54700

ETHYL-2-CYANOACRYLATE

CAS: 7085-85-0

Fraction By Weight: 95%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: MAY CAUSE LIGHTHEADEDNESS OR
DIZZINESS. EYES/SKIN: SEVERE IRRITATION. IMMEDIATE BONDING OF
TISSUES CAN OCCUR. INGEST: MODERATE TO SEVERE IRRITATION OF MUCOUS
MEMBRANES. IMMEDIATE BONDING MAY OC CUR.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN, EYE, AND
RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE.

First Aid:INHAL: MOVE VICTIM TO FRESH AIR. EYES: FLUSH W/CLEAR WATER
IMMEDIATELY FOR A MINIMUM OF 15 MINUTES. GET IMMEDIATE MEDICAL
ATTENTION. SKIN: WASH W/SOAP & WATER. SEEK MEDICAL ATTENTION IF
TISSUES ARE BO NDED. IF POSSIBLE, SOAK COATED AREA IN COOL WATER.
INGEST: SEEK IMMEDIATE MEDICAL ATTENTION.

Flash Point Method:TCC
Flash Point:176F, 80C
Extinguishing Media:CO2, HALON, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER SPRAY CAREFULLY APPLIED TO A FIRE MAY
BE SUCCESSFUL. DIRECT SPRAY MAY CAUSE FROTHING.
Unusual Fire/Explosion Hazard:RAPID POLYMERIZATION MAY CAUSE AUTO
IGNITION.

Spill Release Procedures:REMOVE ANY IGNITION SOURCES, VENTILATE AREA.
WIPE UP W/CLOTH & IMMEDIATELY SOAK IN WATER. THE ADHESIVE REACTS
W/WATER FORMING AN INSOLUBLE MATERIAL THAT CAN BE DISPOSED OF.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL, DRY PLACE WITH
CONTAINER TIGHTLY SEALED. KEEP THIS & ALL CHEMICALS OUT OF REACH OF
CHILDREN. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY.
Other Precautions:BONDS TO TISSUES RAPIDLY. COVER SKIN WHEN THE
POSSIBILITY OF BONDING EXIST. THIS PROD CONTAINS PMMA (CAS
9011-14-7) WHICH WHEN IMPLANTED UNDER THE SKIN OF EXPERIMENTAL
ANIMALS CAUSED TUMORS.

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR MASK ABOVE
TLV.
Ventilation:AMBIENT TYPE ROOM ATMOSPHERE. APPROX 50-200 CFM.
Protective Gloves:BUNA-N TYPE.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:V4
Boiling Pt:B.P. Text:149F, 65C
Spec Gravity:1.05
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, VISCOUS LIQUID WITH ACRYLATE ODOR.
Percent Volatiles by Volume:5

Stability Indicator/Materials to Avoid:YES
ALKALIES, ACIDS, PEROXIDES, OXIDIZING, & REDUCING AGENTS.
Stability Condition to Avoid:HIGH HUMIDITY.
Hazardous Decomposition Products:CO2 (COMBUSTION ONLY).

Waste Disposal Methods:INCINERATE SOLID COMBUSTIBLE WASTE OR DUMP AS
CHEMICAL WASTE ACCORDING TO LOCAL, STATE, AND FEDERAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.